The Basics of Air Conditioning Repair OKC

When an air conditioner isn’t working properly, there are a few things to check before calling in a repair person, which is going to cost money. Before checking anything on an HVAC system, be sure that the breakers for the furnace/air handler and the air conditioner are actually turned on. Sometimes, it is as simple as flipping the breaker switch to have cool air flowing through the home again. If there is no problem with the breaker, and it hasn’t been tripped, the home owner will have to check into a number of other issues that could be causing the problem. If it was the breaker, and it continues to trip, there could be a problem with the wiring in the furnace. Click here for more information.

Some of the problems that require air conditioning repair OKC include issues with the furnace, thermostat, control board, or the wires that run between the thermostat and the furnace. If there is a condensate pump, it could be that the reservoir is full. If it is full, there is a limit switch that automatically switches the air conditioner off. When this happens, the pump will need to be repaired or replaced.

Another reason for needing air conditioning repair in OKC is if the fan on the outside unit is blowing out hot air instead of cool. If the outside fan is running, but the blower is not, it could be that there is a problem with one of three things, the blower motor, its run capacitor, or the control board on the furnace. If it is the fan motor that isn’t working, the first thing to do is shut off all power to the system, and check the wire connections to be sure that they aren’t damaged. If there is any damage to the wires, it will need to be repaired immediately by

The best way to ensure that an air conditioning system is always working properly is to have it inspected regularly, and to have regular maintenance. This can be done by the professionals at TS Heat & Air, as well as repair work, and installing new HVAC systems in homes and in businesses.

You may also like...