Replacing Masonry Bricks In Retaining Walls In Waukesha WI

by | Oct 17, 2017 | Construction and Maintenance

Retaining walls are often used to outline a piece of property and can help keep soil contained inside of a flowerbed or garden. If a retaining wall is constructed of bricks and a couple bricks have loosened and fallen from a wall, portions of a wall are at risk of collapsing if plenty of support is not around remaining bricks. The following project describes how to clean empty spots in Retaining Walls in Waukesha WI and replace bricks.

Supplies

  • sheeting
  • garden sprayer
  • water hose
  • non-chlorine bleach
  • all purpose detergent
  • scrub brush
  • putty knife
  • bag of mortar mix
  • plastic bucket
  • metal mixing stick
  • masonry bricks
  • trowel
  • non-abrasive sponge

Remove Dirt And Old Mortar

Weighted drop cloths or another type of waterproof fabric can be laid across property that borders each side of a retaining wall. A garden sprayer’s holding tank needs to be filled with water. Some non-chlorine bleach and all purpose detergent can be mixed with water. A cleaning solution should be sprayed directly at portions of a wall that are damaged.

Bleach and detergent will break down stains and assist with loosening old mortar that remains on a wall’s surface. A scrub brush or putty knife should be moved back and forth over old putty to remove it. Rinsing a wall off with water is necessary to remove a cleaning solution and loose dirt that remains on a wall.

Prepare Mortar And Insert Bricks In Gaps

Mortar mix is a powdery substance that can be purchased from a construction or landscaping business. Mortar is simple to prepare. Directions are listed on a bag that will describe how much water needs to be added to mix. After pouring mix into a plastic bucket, water should be added to mix and both components need to be stirred for a few minutes. Mortar will stiffen quickly, so it is important to use mortar soon after it is prepared.

Masonry bricks need to have an even coat of mortar spread across sides of each brick that will be adjoined to surrounding bricks. Bricks can be inserted in a wall and mortar will adhere soon afterward. A non-abrasive sponge that has been moistened with water can be used to wipe away mortar that has been accidentally applied to the front-side of each brick. Assistance with repairing or installing Retaining walls in Waukesha WI can be acquired by contacting Outdoor Living Unlimited or a different business.

Latest Articles

Categories

Archives

Similar Posts