Air conditioners come in various types from the portable system that hangs out of a window to the larger appliances that require multiple cabinets. The latter option is also broken down into different versions including the split AC and the HVAC (heating, ventilation and air conditioning) system. While both of these appliances use similar principles, they deliver the treated air in different ways. The split AC uses multiple blower units to provide chilled air to various zones. HVAC systems make use of air ducts to carry the treated air throughout the building. Due to the complexity of these appliances, there is a chance that something will fail and the system will require AC repairs in Naples, FL.
One component of an AC that may fail is the condenser unit. The condenser is that portion of the HVAC system that is placed outside the building. Its function is to compress the refrigerant and cycle it through a series of coils. This kind of work can generate extreme pressures and plenty of heat, which is why lubricating the device is so important. However, the only way to lubricate an operating condenser is with the refrigerant pumping through it. This is one reason that checking the refrigerant level is a crucial aspect of system maintenance. Eliminating condenser failure is one of the most expensive AC repairs in Naples, FL. Even worse, replacing this component may not even be possible. Certain older air conditioning systems are still using a refrigerant that is no longer available under U.S. regulations. This means that the failing appliance must be replaced.
There are many other components in an AC that are prone to failure. For instance, air conditioners need to cycle through various states when removing heat from a building. The process begins with the compressed refrigerant because compressing the chemical results in a state change. The next step is to push the refrigerant through the evaporator coil where it collects heat through the metal of the coil. Any accumulated heat is eventually released via the condenser coil located outside of the building. Meanwhile, the temperature in the air exchanger is constantly tested, so the appliance knows when to cycle the blower on and off. Moving air through the evaporator coil cools the building because the ambient temperature of the refrigerant is lower than the surrounding air. Click here for more information about air conditioners and their repair.
