Simple Maintenance for Your HVAC in Baltimore MD

Part of maintaining the right indoor quality is having your HVAC in Baltimore MD system work at optimal levels. This system controls the temperature and humidity in the air along with filtering out unwanted substances. To keep your system working right, it’s a good idea to perform maintenance every year and intermittently when needed. Use the following guidelines for this task.

The main parts of an HVAC in Baltimore MD system are the condenser and the evaporator. The condenser is located outside the home on a flat surface, usually slab concrete. The evaporator is located in the plenum above the furnace. Before you start any work, make sure you disconnect the power source at the main entrance panel or a separate entrance panel. Ensure that you have plenty of light so you won’t harm yourself or your system.

Start your maintenance by accessing the evaporator. The plenum may have insulation wrapped around it. Remove the tape carefully so you don’t damage the adhesive. Next, open the access plate. Move the evaporator out as far as you can without damaging any rigid pipes it may be attached to. Use a stiff brush to clean the top, sides, and underside of this device. Hold a mirror in front of the back so you can use the reflection so see your moves when you clean the back. To clean the evaporator tray, pour household bleach the tray and clean it out with a sponge. The drain line leading away from this tray should be cleaned as well. Use a piece of wire to clean the weep hole. When you are done, put the evaporator and insulation back into place.

After you clean the evaporator, work on the condenser. Remove weeds plants, grass, and vines that are growing into the condenser. Use an industrial cleaner to remove dirt and grime from the condenser. A carpenter’s level can be used to check the stability of the condenser. When you are done, put all parts back into place.

Maintaining your HVAC system in Baltimore MD is a good way to keep a major appliance working properly. You can save on repair costs also. Learning about your system will help repair and maintain it yourself.

Be the first to like.

Share

    You may also like...