Checking the condition of a septic tank should not be done only every three or four years. It should be done more frequently in order to ensure that no backups or unexpected flooding occur. The septic system itself is used to treat and dispose wastewater and solids from a plumbing network. The solids are partly degraded into sludge inside a septic tank and then divided from the scum (oil, grease, or fat) and the effluent or water.
How the Septic Tank Works
The effluent in septic tanks in Sorrento, FL leaves the tank and settles into a drainfield. Once the water enters this location, it is filtered naturally by bacteria before it becomes a part of the groundwater. The sludge and scum in the tank, which should be pumped routinely, should never appear in the drainfield at all.
Many experts suggest that Sorrento septic tanks be inspected annually. If a home is placed on the market, an inspection is advised at these times as well. A tank inspection report will increase the value of a home and ensure that no problems exist with liability. If a prospective buyer is interested in purchasing a home, it is in his or her best interest to have the system checked before making an offer to buy the property.
How to Determine the Tank Size
Inspectors who check septic tanks make sure that the system can accommodate the household. If more occupants live in a home, naturally a larger tank is needed. The capacity in gallons, for instance, is determined by the dimensions of a tank. For instance, for a rectangular tank, you multiply the length by the width by the depth before multiplying the result by 7.5 for the capacity.
Because septic tanks perform their operations underground, some new homeowners are not sure of the location of their septic tanks. While this usually does not cause any concern for the property owner at the onset, it does become an issue if he or she needs to schedule an inspection.
When septic tanks are finally located, it helps for new property homeowners to find out when the septic tank was last pumped. The sludge level normally determines whether or not a tank needs pumping. However, knowing the prior pumping date can be helpful for inspection purposes.
