Safety Tips For Operating A Portable Power Plant In Edmonton

Many work sites and companies depend on a power plant to keep their business running smoothly in the event of an emergency or power outage. While these systems are valuable to possess, safety rules should always be put into place and followed to the letter. Below are some very important safety tips to observe when running your Portable Power Plant in  Edmonton area generator.

*  Anyone who will be operating or performing maintenance to the power plant should read the manufacturer’s instruction manual first.

*  The exhaust fumes of a power plant contain carbon monoxide, so the generator should never be in an enclosed area due to the danger of carbon
monoxide poisoning.

*  Before adding fuel, let the system cool down for several minutes first. This is to prevent an explosion due to the excessively flammable gas vapors.

*  If the generator will not be used for 30 days or longer, add a fuel stabilizer to the gasoline. This extends the life of the gasoline and keeps it fresh while it’s not being used for a prolonged period of time.

*  To prevent an explosion, make certain that there are no combustible materials close to the power plant while it’s in operation.

*  If extension cords are used, make sure they are rated correctly for the application and that they are grounded. Never coil the cords as they can get too hot. You should lay the cords straight out and flat on the ground in an open area.

*  Never operate the power generator in wet conditions such as in rain, snow or around a sprinkler system. Make sure that your hands are dry before performing any maintenance, so you don’t get an electrical shock.

*  Perform regular maintenance on your portable power plant as specified in the manufacturer owner’s manual. Make any repairs as soon as possible for optimal performance and safety considerations.

For any specialized maintenance or repair to your system, you should contact a Portable Power Plant Edmonton area service technician. Attempting repairs that you are not qualified to perform could result in a safety hazard and irreparable damage to your system. It’s also a good idea to have your power plant serviced by a trained professional at least twice a year to make sure there are no issues with the system.

Be the first to like.

Share

    You may also like...