When using lifting clamps in NY, it is important that you follow specific instructions given by the manufacturer. Lifting clamps are an integral part of different types of construction works. They are also used in a wide range of applications. However, as an operating principle you need to follow the safety instructions provided by the manufacturer. Click here for more information.
Once you purchase a lifting clamp, read the safety instructions provided by the manufacturer carefully and follow them. This will ensure that you will continue using the clamp for long without sustaining injuries or damages. If the instructions are not provided by the manufacturer, follow the general safety instructions for lifting clamps.
One of the major safety instructions that come with most lifting clamps is ensuring that clamps are inspected and tested before you start using them. If necessary, ensure that the clamps are overhauled at least once every year. A professional should inspect, test and overhaul the clamps. Other mechanical services and repair should also be done whenever necessary.
While using lifting clamps, you should also avoid situations that are danger to human life. Avoid working with disapproved or untested lifting clamps. In addition, maintain a safe distance while lifting items with the clamp. Never stand near or under the item that you are lifting using the clamp.
If you detect that the clamp has sustained some damages, do not use it until when it has been repaired. If you are not sure whether the clamp is in proper working condition, contact a specialist to inspect it. You can also contact the supplier for assistance if any operation of the lifting clamp is not clear to you.
While using lifting clamps in NY, it is important to avoid lifting plates that are heavier than the stipulated weight. The allowed weight is indicated on the test certificate and clamp. You should also avoid lifting plates that have weight that is below 10 percent of the indicated weight.
In addition, you should avoid lifting plates that are thinner or thicker than the opening of the jaw of the clamp. Be more careful when lifting items from a non-vertical position. If you are using more than one lifting clam at a time, use lifting chains or slings of superior quality and length. The angle between the chains and slings should not be more than 60 degrees.
Lifting clamps should never be placed on conical shaped or tapered sections o the structure or plate that is being lifted. Ensure that the place where you will attach the clamp is free of corrosion, dirt, oil or grease.
